Billet Aluminum Jeep Products

Products

Check out the full line of Jeep parts and accessories below. We use state-of-the art CNC milling equipment that provides you with the highest quality products. All of NCM’s parts are 100% American made and are milled from top grade billet aluminum. Visit our Contact Us Page if you do not find a product you are looking for, and let us know what you are looking for or for a specialty made item.

Where to buy our products

You can order one of the products listed below by clicking on the following distributor, or for special made products, use the Contact Us Page to find out more information.

Billet Pedals For JK’s

Don’t let your feet slip off the pedals when your out wheeling your Jeep. Install a set of these billet pedals designed to bolt on and replace the factory rubber pieces. Providing better grip in those slippery situations. Available for auto or manual trans. Anodized gray. Made in U.S.A.

MSRP = $140

Billet Pedals For TJ’s & XJ’s

Don’t let your feet slip off the pedals when your out wheeling your Jeep. Install a set of these billet pedals designed to bolt on and replace the factory rubber pieces. Providing better grip in those slippery situations. Available for auto or manual trans. Anodized gray. Made in U.S.A.

MSRP = $100

Power Steering Cap Cover for JK’s

Dress up under the hood of your JK with one of these billet aluminum power steering cap covers. Machined for a precision fit over the factor cap. Uses screws to secure it in place on the factory cap. They are available anodized red, blue, and satin silver.

MSRP = $36

Brake Cap Cover for JK’s

Dress up under the hood of your JK with one of these billet aluminum brake cap covers. Machined for a press fit over your factory brake cap. They are available anodized in red, blue and satin silver. Installs in seconds.

MSRP = $36

Oil Cap Cover for JK’s

Dress up under the hood of your JK with one of these billet aluminum oil cap covers. Machined for a precision fit over the factory cap. Uses screws to secure it in place on the factory cap. They are available anodized red, blue, and satin silver.

MSRP = $36

Power Steering Cap Cover for TJ’s

Dress up under the hood of your TJ with one of these billet aluminum power Steering cap covers. Machined for a press fit over your factory brake cap. They are available anodized in red, blue and satin silver. Installs in seconds.

MSRP = $26

Brake Cap Cover for TJ’s

Dress up under the hood of your TJ with one of these billet aluminum brake cap covers. Machined for a press fit over your factory brake cap. They are available anodized in red, blue and satin silver. Installs in seconds.

MSRP = $26

Oil Cap Cover for TJ’s

Dress up under the hood of you Wrangler with one of these billet aluminum oil cap covers. Available engraved with 4.0 or 2.5 on the top. They are a slip fit over the factory cap. And for added safety adhere with 3M double stick tape. They are available anodized in red, blue and satin silver. Installs in seconds.

MSRP = $26

Battery Hold Downs for CJ’s

Any one who has every owned a CJ knows that the factory foot clamp on the battery rarely ever holds. Make sure your battery is secured properly with one of these billet aluminum battery hold downs. These will replaces the factory foot clamp to a more secure of the top style clamp. They are available anodized in black, red, and silver. Hardware included.

MSRP = $60

Battery Hold Downs for TJ’s & YJ’s

Make sure your battery is secured properly in your TJ or YJ with one of these billet aluminum battery hold downs. They fit all flat top style batteries and offer a better fit than the factory steel clamp. They are available anodized in black, red, and silver. And come with new fasteners.

MSRP = $50

Passenger Grab Handle for TJ’s

Starting with a 7 lb. piece of aluminum. These billet TJ passenger grab handles are sure to draw attention and add a great look to your TJ dash. Easy to install just by removing the two nuts that hold on the factory grab handle, then installing the billet handle. Available anodized in satin silver and black.

MSRP = $85

E.F.I. Wire Harness Cover

Installing one of these E.F.I. wire harness covers is a great way to dress up the 4.0L under the hood of your jeep. They are machined from solid billet aluminum, and replace the factory plastic E.F.I. wire harness cover. Pull the old one off and snap the new one on in its place. They are available anodized in red, blue and satin silver.

MSRP = $85

Spark Plug Wire Guides 4.0L

A great remedy for larger after market plug wires that won’t fit in the factory plastic wire guide. Bolt one of these billet aluminum spark plug wire guides onto your 4.0L. They are a direct replacement for the factory plastic guide that always seems to break. There unique design allows them to hold factory 7mm plug wires or after market plug wires up to 8.5mm. They are available anodized in red, blue or satin silver.

MSRP = $43

Billet Shift Bezel (for manual transmission)

Upgrade your JK interior by replacing the plastic shift bezel with one of these billet aluminum ones. Available anodized in satin silver with stainless fasteners.

MSRP = $70

Control Knobs for TJ’s

Add a nice touch to your TJ dash with a set of these billet aluminum climate control knobs. They illuminate when the lights are on just like the factory knobs. Easy install, just pull the factory knob off and press the billet knob on. Available anodized in satin silver or black (black knobs have contrast cut), with factory blue and red illumination.

MSRP = $55 (set of three)

Windshield Hold Downs

Ad a nice touch to your dash by replacing the factory stamped steel windshield hold downs on your CJ or YJ with a pair of these billet aluminum hold downs. They are extra thick for a great look. Available anodized in satin silver. Stainless hardware included.

MSRP = $50 pair

Gauge Cover

Add a distinctive look to your CJ dash with one these billet aluminum gauge covers. They are available with or with out the radio-cut out. Unlike other aftermarket gauge covers with the old style two post radio cut out, these covers come with a DIN size radio cut out to fit modern style after market receivers. The top is ball milled for a distinctive look. They are available anodized in black or satin silver. Stainless hardware included.

MSRP = $60

Steering Column Cover

Add a distinctive look to your CJ dash with one these billet aluminum steering column covers. The top is ball milled for a distinctive look. They are available anodized in black or satin silver. Stainless hardware included.

MSRP = $40